30MS Optional Parts Set 3 (Mechanical Unit)

Very simple black and white kit, primarily meant for the 30MS line, but I'd be surprised if you couldn't put them on a 30MM of some kind, with a bit of ingenuity.

The arms are in two pieces each. You have the arm connector which slots onto the peg of a shoulder piece of a 30MS and has an elbow, a sideways pivot and an outer ball joint that the second piece slots onto.
The second piece is the outer shell and mechanical 'fingers', which are prominently displayed on the product images.
For whatever reason, the first piece blocks nearly all of the articulation of the second piece. It's like building a brick wall in front of a fire station, it just doesn't make sense.
When it's not blocked, the lower section of the outer shell "arm" can pivot and likewise both the external and internal fingers, making for a decent grab (can't hold anything, no dedicated slots).

The second piece, meaning the outer shell, also has a 3mm hard point on the exterior as well as near the top of the interior, so you can put it onto an upper arm slot of a model, instead of using the connected arm piece, so it becomes either a shield or an exterior claw piece.

The legs are thigh-downwards that slot onto thigh pegs. They have an X shaped foot on a ball joint and a double knee bend. Just like the arms, however, they also have a piece that consistently gets in the way and pops off of their C-clip joint, which are the thruster plates on the back of the thighs.

Neither issue is terrible, but they're obvious results of half-baked plans. You can work around the issues, but this really should've worked out of box.

Regardless, I like the kit in spite of its flaws, I think it's fun and Lord Above knows that we need more limb kits for all the 30MS body kits!

Very simple black and white kit, primarily meant for the 30MS line, but I'd be surprised if you couldn't put them on a 30MM of some kind, with a bit of ingenuity.

The arms are in two pieces each. You have the arm connector which slots onto the peg of a shoulder piece of a 30MS and has an elbow, a sideways pivot and an outer ball joint that the second piece slots onto.
The second piece is the outer shell and mechanical 'fingers', which are prominently displayed on the product images.
For whatever reason, the first piece blocks nearly all of the articulation of the second piece. It's like building a brick wall in front of a fire station, it just doesn't make sense.
When it's not blocked, the lower section of the outer shell "arm" can pivot and likewise both the external and internal fingers, making for a decent grab (can't hold anything, no dedicated slots).

The second piece, meaning the outer shell, also has a 3mm hard point on the exterior as well as near the top of the interior, so you can put it onto an upper arm slot of a model, instead of using the connected arm piece, so it becomes either a shield or an exterior claw piece.

The legs are thigh-downwards that slot onto thigh pegs. They have an X shaped foot on a ball joint and a double knee bend. Just like the arms, however, they also have a piece that consistently gets in the way and pops off of their C-clip joint, which are the thruster plates on the back of the thighs.

Neither issue is terrible, but they're obvious results of half-baked plans. You can work around the issues, but this really should've worked out of box.

Regardless, I like the kit in spite of its flaws, I think it's fun and Lord Above knows that we need more limb kits for all the 30MS body kits!